ThermoStream Configurations
Temptronic's ATS Mobile Temperature Systems deliver temperatures from -100 to +300°C. All systems provide remote communications via IEEE 488 and RS-232, and two temperature outputs for control measured at the thermal head or directly at the DUT.
A variety of configurations allow flexibility to optimize your floor space and access to the DUT. Models ending in "-M" have an articulated arm and head that can be raised and lowered over test setups. Model ending in "-T" have a turret and hose for connecting to enclosures, MobilTempTM chambers, or custom test setups.
For details click on any of the links below or visit the Resource Center.
Accessories to view accessories such as enclosures with dry-air purge and anti-ESD mats.
![]() |
![]() |
![]() |
![]() |
||||
---|---|---|---|---|---|---|---|
500 & 600 Series Mobile Temperature Environments |
|||||||
Model | ATS-505, 605 | ATS-515, 615 | ATS-525, 625 | ATS-535, 635 | ATS-545, 645 | ||
LN2 or LCO2 not required | √ | √ | √ | √ | √ | ||
Temperature Range (at thermal head) | -20 to +225°C | -45 to +225°C | -60 to +225°C | -60 to +225°C | -80 to +225°C | ||
System Airflow Output | 4 to 10 scfm (1.9 to 4.7 l/s) |
4 to 10 scfm (1.9 to 4.7 l/s) |
5 scfm (2.4 l/s) Fixed Flow | 5 scfm (2.4 l/s) Fixed Flow | 4 to 18 scfm (1.8 to 8.5 l/s) Continuous | ||
Transition Rates | 0 to +125°C, <3 min +125 to 0°C, <4 min |
-40 to +125°C, <12 sec +125 to -40°C, <40 sec |
-40 to +125°C, <12 sec +125 to -40°C, <40 sec |
-40 to +125°C, <12 sec +125 to -40°C, <40 sec |
-55 to +125°C, <10 sec +125 to -55°C, <10 sec |
||
Temperature Display & Resolution | ±1°C | ±1°C | ±1°C | ±1°C | ±1°C | ||
Temperature Accuracy | ±1°C | ±1°C | ±1°C | ±1°C | ±1°C | ||
Directly Control Device Under Test (DUT) | √ | √ | √ | √ | √ | ||
DUT Control Sensors | Type T or K Thermocouples | Type T or K Thermocouples | Type T or K Thermocouples | Type T or K Thermocouples | Type T or K Thermocouples | ||
Remote interface | IEEE.488, RS232 | IEEE.488, RS232 | IEEE.488, RS232 | IEEE.488, RS232 | IEEE.488, RS232 | ||
Thermal Cap with protection from condensation at DUT site | √ | √ | √ | √ | √ | ||
Compact, portable system | Fits bench top | Easily integrates to bench top | Easily integrates to bench top | LabView™ drivers | LabView™ drivers | ||
CE Compliant and CFC-free | √ | √ | √ | √ | √ | ||
Facility requirements | CDA at 90 psi minimum; Various power requirements available 130-240 VAC, 50/60Hz | Built-in compressor; No facility air needed |
Same as ATS-505 to 625 |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
700 & 800 Series Mobile Temperature Environments |
||||
Model | ATS-710, 810 | ATS-730, 830 | ATS-750, 850 | ATS-770, 870 |
LN2 or LCO2 not required | √ | √ | √ | √ |
Temperature Range (at thermal head) | -80 to +225°C | -90 to +225°C | -90 to +300°C | -100 to +225°C |
System Airflow Output | 4 to 18 scfm (1.8 to 8.5 l/s) Continuous | 4 to 18 scfm (1.8 to 8.5 l/s) Continuous | 4 to 18 scfm (1.8 to 8.5 l/s) Continuous | 4 to 12 scfm (1.8 to 5.6 l/s) Continuous |
Transition Rates | -55 to +125°C, <10 sec +125 to -55°C, <10 sec |
-55 to +125°C, <10 sec +125 to -55°C, <10 sec |
-40 to +125°C, <12 sec +125 to -40°C, <40 sec |
-55 to +125°C, <10 sec +125 to -55°C, <10 sec |
Temperature Display & Resolution | ±1°C | ±1°C | ±1°C | ±1°C |
Temperature Accuracy | ±1°C | ±1°C | ±1°C | ±1°C |
Directly Control Device Under Test (DUT) | √ | √ | √ | √ |
DUT Control Sensors | Type T or K Thermocouples, RTD (100 Ohm) |
Type T or K Thermocouples | Type T or K Thermocouples | Type T or K Thermocouples, RTD (100 Ohm) |
Remote interface | IEEE.488, RS232 | IEEE.488, RS232 | IEEE.488, RS232 | IEEE.488, RS232 |
Thermal Cap with protection from condensation at DUT site | √ | √ | √ | √ |
LabView™ drivers | √ | √ | √ | √ |
CE Compliant and CFC-free | √ | √ | √ | √ |
Heated Defrost | √ | - | √ | √ |
Reduced Power Mode - heat only when using cold temperatures | √ | - | √ | √ |
Automatic Power Reduction - reduce power usage during idle time | √ | - | √ | √ |
Mechanical Arm or Turret Configuration | √ | √ | √ | √ |
Optional Extended Height & Reach configuration for Mechanical Arm | √ | √ | √ | √ |
Thermal Cap size options & Flexhose to connect external thermal chamber or test enclosure | √ | √ | √ | √ |
Facility requirements | CDA at 90 psi minimum; Various power requirements available 130-240 VAC, 50/60Hz |